Active ProductIQTD-GS440
€89excl. VAT€107.69 VAT incl.DIN-rail 2G GSM controller with two 16 A relays, two PWM outputs, SMS, IVR and Bluetooth control.

4G LTE DIN-rail controller with two 16 A relays, two PWM outputs, classic Bluetooth and BLE.
Every IQsocket, IQgate and IQboard device is delivered with the BASE software licence already included.
Additional features can be unlocked at any time by upgrading to the MEDIUM or FULL software licence. No hardware replacement is required.
All displayed product prices already include the BASE software licence.
MEDIUM and FULL licences are optional software upgrades and can be purchased at any time.
Industrial 4G LTE DIN-rail controller IQTD-GS440-4G: two 16 A relays, PWM outputs, SMS, IVR, classic Bluetooth, open BLE and sensor inputs.
IQTD-GS440-4G is an industrial 4G LTE controller for remote switching, monitoring and automation on a DIN rail. It provides two independent 230 V AC / 16 A relay outputs for resistive loads and two 40 V DC / 5 A MOSFET outputs with PWM. Control it by SMS, phone call, IVR voice menu, classic Bluetooth (BT) or Bluetooth Low Energy (BLE). Both Bluetooth modes are included as standard. Its open BLE command protocol also allows integration with compatible third-party apps; an IQtronic BLE terminal is available in Downloads. Four digital inputs, two analogue voltage inputs and a bus for up to eight sensors support alarms and automatic actions. An optional backup battery supports monitoring during a power outage. Commands are licensed in BASE, MEDIUM and FULL levels; see the model-specific licensing guide.
IQTD-GS440-4G ships with the BASE firmware licence. Advanced features are unlocked through software licences.
The licence is bound to the serial number of your device, which you enter in the checkout. The key is e-mailed after the payment is confirmed.
Full electrical and mechanical data is available in the datasheet.
| Installation | DIN rail |
|---|---|
| Mobile network | 4G LTE |
| Relay outputs | 2 × 230 V AC / 16 A, resistive load |
| DC outputs | 2 × 40 V DC / 5 A MOSFET, PWM up to 20 kHz |
| Control | SMS, call, IVR voice menu, classic Bluetooth (BT) and Bluetooth Low Energy (BLE); both standard |
| BLE integration | Open command protocol for compatible third-party apps; IQtronic BLE terminal |
| Inputs | 4 digital, 2 analogue voltage; sensor bus for up to 8 sensors |
| Backup battery | Optional 14500 Li-ion/Li-Pol, 3.7 V; not included |
| Command licensing | BASE, MEDIUM, FULL; see licensing guide |
Everything you need for installation, configuration and operation.
Active ProductDIN-rail 2G GSM controller with two 16 A relays, two PWM outputs, SMS, IVR and Bluetooth control.
Active ProductDIN-rail ripple control receiver with the same control principle as the plug-in version.