IQTB-TC840
IQboard

IQTB-TC840

Ethernet temperature and humidity controller board with two sensor inputs, two relays and SNMP.

Phase Out
ProducerIQtronic technologies Europe s.r.o.
Overview

IQTB-TC840 — Ethernet temperature and humidity controller board with two sensor inputs, two relays and SNMP.

IQTB-TC840 IQboard LAN: Ethernet temperature and humidity monitor, IP thermostat and hygrostat with two sensor inputs, two 1 A relays, data logging and SNMP.

IQTB-TC840 is an IQboard LAN controller for monitoring temperature and humidity and controlling equipment over Ethernet. Connect compatible external sensors to its two inputs, view current readings and recorded history in a web browser, and use two relay outputs for thermostat, hygrostat or scheduled control. The board supports SNMP monitoring and traps, differential control and an equithermal control table. Passive PoE and an optional DIN-rail adapter simplify installation. The relay contacts are rated 30 V DC / 1 A; they are not intended to switch mains loads directly. An onboard temperature sensor supplements the two external inputs. Depending on the connected probes, the controller can also monitor relative and absolute humidity, dew point or pressure; DS18B20 temperature probes are supported. The internal data logger records both external sensor inputs and the board's own temperature for up to one year. The web interface displays live readings, relay states, minimum and maximum values with timestamps, and history graphs for the connected sensors. Logged values, including board temperature, can also be read through SNMP v1. The programmable scheduler supports up to 30 entries; SNMP traps report configured events.

Regular production and support ended in 2020. Custom supply is available from 100 units on an AS IS basis. The original English manual remains available for installed units.

Technical Specifications

Specifications

Full electrical and mechanical data is available in the datasheet.

NetworkEthernet 10Base-T; web interface, SNMP v1
Sensor inputs2; compatible temperature and humidity sensors
Relay outputs2 changeover contacts, max. 30 V DC / 1 A each
Power12 V DC recommended; passive PoE supported; approx. 1 W
Board dimensions72 × 50 mm
Documents & software

Documents & software

Everything you need for installation, configuration and operation.

Documents

Documentation & downloads

Datasheets, manuals and firmware, all in one place? Go to: Download center →
Loading…